
Every Tool on the Elemento Tab
01 / 1 tool
Reinforce a whole view in one run.
Reinforces every beam, column, wall, slab, stair and footing in the view in one run, each kind to the preset you choose.
02 / 11 tools
One tool per member. Pick the member, choose a preset, and the tool builds the cage. Applying again replaces what it made.
Stirrups in up to three spacing zones, with top, bottom and side bars.
All the reinforcement in a curved concrete beam, with bars that follow the curve.
Ties, vertical bars and links in a concrete column, lapped at each floor.
Mesh on one or both faces of a concrete wall, with corner bars where walls meet.
Top and bottom mesh in a slab or structural floor, split around openings.
All the reinforcement in a concrete stair.
Top and bottom mats in an isolated pad foundation.
Top and bottom mats in a strip footing under a wall, straight, joined or curved.
Starter bars from a pad footing up into the columns standing on it.
SANS shape 83 stools that hold the top mat up off the bottom mat.
Trimmer bars around an opening in a wall, floor or shaft.
03 / 3 tools
Revit’s own hand placement, on the Elemento tab beside the rest of your rebar work.
Places single bars from the shape browser: planar, multi-planar or spiral.
Free-form bars spread along a path you choose.
Free-form bars that follow the faces you select.
04 / 4 tools
Find the members Elemento has reinforced, and change them.
Lists every member reinforced by Elemento, with a check that its bars are all still there.
Pick a reinforced member and its tool opens with the settings it was made with.
Copies one member’s reinforcement onto other members of the same kind.
View, duplicate, rename, delete and share the saved presets of every tool.
05 / 4 tools
Cut, split and lap bars that are already in the model.
Splits bars where they cross an opening and pulls the new ends back by cover.
Cuts bars at a point, detail line or reference plane and keeps both sides.
Divides a rebar set into two sets without changing bar lengths.
Cuts bars at a point and laps the two pieces through it.
06 / 12 tools
Keep a busy model readable: across the whole view, or for one member.
Hides all reinforcement in the active view.
Shows all reinforcement in the active view again.
Selects all reinforcement in the active view.
Draws the bars through their concrete host.
Puts the normal display back: bars are hidden where the host covers them.
Deletes all reinforcement in the active view, as one undo.
Hides the reinforcement of one picked member in this view.
Selects all reinforcement in one picked member.
Deletes all reinforcement in one picked member.
Hides the reinforcement of the partitions you tick, in this view.
Shows only one member and the reinforcement it hosts.
Shows everything again after Isolate Rebar.
07 / 2 tools
Read the model at a glance by colouring the steel.
Colours the bars in the view by the values of any parameter, such as partition or bar size.
Clears every rebar colour override in the view.
08 / 2 tools
Turn a congested section into one you can annotate.
Shows one bar per rebar set, ready for a callout. Plan and section views.
Shows every bar of every set again. Plan and section views.
09 / 4 tools
Annotate the bars so the drawing and the schedule agree.
Calls off a whole range of bars in one tag, placed from offsets. Plan and section views.
Tags the bars a section cuts, in one of three layouts.
Renames partitions and tidies their bar numbers.
Draws a legend of every shape code your bending schedules print.
10 / 6 tools
From the reinforced model to finished sheets.
Draws every reinforced floor and beam in view on new sheets, at scales that fit.
Draws a slab’s plan and sections on a sheet, with a live preview.
Draws a beam’s elevation and sections on a sheet, with a live preview.
Draws a column’s elevation and plan sections on a sheet, with a live preview.
Draws a wall’s elevation and sections on a sheet, with a live preview.
Splits each bending schedule into sets and lays them across your sheets.
11 / 2 tools
SANS 282 shape codes and bending dimensions, taken from the model.
Builds a bending schedule for each rebar partition.
Writes the schedules to one Excel workbook, a tab per partition.
12 / 4 tools
Get a project ready, and keep its standards in one place.
Brings shapes, bar types, schedule templates and presets into the project from the country template.
Saves the families loaded in the project out as .rfa files.
Opens Revit’s rebar cover settings.
Opens Revit’s reinforcement settings: rounding, hosting and tag abbreviations.
13 / 4 tools
Licence, support and updates, from inside Revit.
Version, licence and what is new.
Enter your activation code, or start the 60-day trial.
Ask a question, report a problem or request a feature.
Checks for a newer version of Elemento and installs it.

The 60-day trial unlocks every tool on this page. No credit card, and nothing to switch on: install Elemento, open Revit 2027 and start the trial from the Help panel.